SUTHERLAND PRESSES AT FABTECH

Our servo hydraulic presses are the most flexible forming presses on the planet. It all starts with our I-PRESS® and automation control. I-PRESS® is built on a Rockwell AB hardware and software program and, then enhanced with our I-PRESS® logic & intuitive graphics package. When you connect our I-PRESS® control to the servo motors and pumps which control our fluid management systems, you get the ultimate in control, programmable motion and pressure profiles. Depending upon the job, one can expect up to 80%+ in energy savings compared to traditional hydraulic presses.

Sutherland Presses HD1 Servo Hydraulic Press

SHOW PRESS SPECS: 

Model: HD1-330-60-60

Tonnage: 30-330

USTStroke: 0" - 20"

Daylight: 30"

Die Area: 60" x 60"

Fast Down: 900 IPM

Fast Press: 35-70 IPM

Slow Press: 5-35 IPM

Fast Up: 900 IPM

Weight: 65,000 LBS

8 Point Slide Guidance

2 Slide Safety Locks, Automatic Lubrication, Die Cushion: 50 Ton, Cushion Stroke: 12", Cushion Pad Area: 36" x 36", Eaton Dual Safety Valves, Fanuc Robot, Capacity: 25 LB, Balluff Sensors: Flow, Tank Level, Pressure, Temp and Leak Detection. By being able to control servo motor speeds and hydraulic flow we are able, via the I-PRESS® control, to throttle back the motor and offer huge energy savings when and where high output is not required.

I-PRESS 3 in 1 Mobile Training Center

I-PRESS® & AUTOMATION 3 IN 1 MOBILE TRAINING CENTER

I-PRESS® automation has been growing in industry acceptance for over a decade.  We build and install them on all Sutherland & KC presses including, 1.) mechanical, 2.) servo hydraulic and 3.) forge presses. The 3 in 1 mobile training center has all three versions of the control which can be selected on the entry screen. I-PRESS® is by far and away the most intuitive and easy to learn press and automation control available today. We extend an open invitation to come play and learn I-PRESS® at the Fabtech show.

I-PRESS® is now available for press upgrades and retrofits. With our cost efficient and vertically integrated panel build and install shops we can reduce cost for the end user.The system is software based, not firmware on chips. This allows us to provide what we call “feature sets” that other control companies call options. Feature sets can be turned on as needed when you choose to add features, such as quick die change, bar code scanners for job set up, auto slide adjust, auto air counterbalance and many more.

Package 1: 10” Panel View & Compact Guard Safety PLC

Package 2: 15” Panel View & Compact Guard Safety PLC

Both packages include I-PRESS® HMI & PLC software

Sutherland Three Generations

THREE GENERATIONS, COME MEET THE TEAM AT FABTECH

Gen 2 & 3, and awesome members of our team will be on site for all four days of the show. We extend open arms to come and learn more about our range of presses and controls. Our sweet spot focus includes: servo hydraulic presses from 100 to 4000 ton, mechanical stamping presses from 200 to 2000 ton, and forge presses from 100 to 4000 ton and I-PRESS® & automation control retrofits.

www.SutherlandPresses.com

 

< BACK TO SUTHERLAND NEWS

SUTHERLAND PRESSES AT FABTECH

Our servo hydraulic presses are the most flexible forming presses on the planet. It all starts with our I-PRESS® and automation control. I-PRESS® is built on a Rockwell AB hardware and software program and, then enhanced with our I-PRESS® logic & intuitive graphics package. When you connect our I-PRESS® control to the servo motors and pumps which control our fluid management systems, you get the ultimate in control, programmable motion and pressure profiles. Depending upon the job, one can expect up to 80%+ in energy savings compared to traditional hydraulic presses.

Sutherland Presses HD1 Servo Hydraulic Press

SHOW PRESS SPECS: 

Model: HD1-330-60-60

Tonnage: 30-330

USTStroke: 0" - 20"

Daylight: 30"

Die Area: 60" x 60"

Fast Down: 900 IPM

Fast Press: 35-70 IPM

Slow Press: 5-35 IPM

Fast Up: 900 IPM

Weight: 65,000 LBS

8 Point Slide Guidance

2 Slide Safety Locks, Automatic Lubrication, Die Cushion: 50 Ton, Cushion Stroke: 12", Cushion Pad Area: 36" x 36", Eaton Dual Safety Valves, Fanuc Robot, Capacity: 25 LB, Balluff Sensors: Flow, Tank Level, Pressure, Temp and Leak Detection. By being able to control servo motor speeds and hydraulic flow we are able, via the I-PRESS® control, to throttle back the motor and offer huge energy savings when and where high output is not required.

I-PRESS 3 in 1 Mobile Training Center

I-PRESS® & AUTOMATION 3 IN 1 MOBILE TRAINING CENTER

I-PRESS® automation has been growing in industry acceptance for over a decade.  We build and install them on all Sutherland & KC presses including, 1.) mechanical, 2.) servo hydraulic and 3.) forge presses. The 3 in 1 mobile training center has all three versions of the control which can be selected on the entry screen. I-PRESS® is by far and away the most intuitive and easy to learn press and automation control available today. We extend an open invitation to come play and learn I-PRESS® at the Fabtech show.

I-PRESS® is now available for press upgrades and retrofits. With our cost efficient and vertically integrated panel build and install shops we can reduce cost for the end user.The system is software based, not firmware on chips. This allows us to provide what we call “feature sets” that other control companies call options. Feature sets can be turned on as needed when you choose to add features, such as quick die change, bar code scanners for job set up, auto slide adjust, auto air counterbalance and many more.

Package 1: 10” Panel View & Compact Guard Safety PLC

Package 2: 15” Panel View & Compact Guard Safety PLC

Both packages include I-PRESS® HMI & PLC software

Sutherland Three Generations

THREE GENERATIONS, COME MEET THE TEAM AT FABTECH

Gen 2 & 3, and awesome members of our team will be on site for all four days of the show. We extend open arms to come and learn more about our range of presses and controls. Our sweet spot focus includes: servo hydraulic presses from 100 to 4000 ton, mechanical stamping presses from 200 to 2000 ton, and forge presses from 100 to 4000 ton and I-PRESS® & automation control retrofits.

www.SutherlandPresses.com

 

back to news >

SUTHERLAND CLIENTS

REQUEST A QUOTE