THE FACE OF NEW FORGING & TRIM CELLS

Apr 23, 2016
ā€¢
Technology

We have just completed another forge and trim installation. Shown above is our 1000 ton hot forge press and 176 ton gap frame trim press.

Cool features including, un-sticking hydraulic overload
devices, motorized ram adjustment, die set holders, LED stroke position
indicators, close tolerance slide guides, safe and reliable control,
fault monitors are easy to understand.

The I-FORGE control with thermal bearing sensors and
tonnage monitor are standard on the hot forge line. I-PRESS control is
standard on our range of trim presses. When you combine the two, the net
effect is reduced set up time and machine protection.

,
we handle all aspects, build, test, ship, truck, rigging and provide
engineers for start up and training. We also offer lease programs for up
to 60 month and in most cases can roll all cost into your lease.

The new hot and cold forge press manufacturing and
assembly plant is fully operational. We extend and open invitation to
you and your team when the time is best suited for you.

If you are considering new forge and trim presses, contact Team Sutherland.

See us at the upcoming FABTECH metal forming shows in Monterrey Mexico in May of 2015 and Chicago in November 2015.

< BACK TO SUTHERLAND NEWS

Sutherland Presses

THE FACE OF NEW FORGING & TRIM CELLS

We have just completed another forge and trim installation. Shown above is our 1000 ton hot forge press and 176 ton gap frame trim press.

Cool features including, un-sticking hydraulic overload
devices, motorized ram adjustment, die set holders, LED stroke position
indicators, close tolerance slide guides, safe and reliable control,
fault monitors are easy to understand.

The I-FORGE control with thermal bearing sensors and
tonnage monitor are standard on the hot forge line. I-PRESS control is
standard on our range of trim presses. When you combine the two, the net
effect is reduced set up time and machine protection.

,
we handle all aspects, build, test, ship, truck, rigging and provide
engineers for start up and training. We also offer lease programs for up
to 60 month and in most cases can roll all cost into your lease.

The new hot and cold forge press manufacturing and
assembly plant is fully operational. We extend and open invitation to
you and your team when the time is best suited for you.

If you are considering new forge and trim presses, contact Team Sutherland.

See us at the upcoming FABTECH metal forming shows in Monterrey Mexico in May of 2015 and Chicago in November 2015.

Heading

Heading

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Suspendisse varius enim in eros elementum tristique. Duis cursus, mi quis viverra ornare, eros dolor interdum nulla, ut commodo diam libero vitae erat. Aenean faucibus nibh et justo cursus id rutrum lorem imperdiet. Nunc ut sem vitae risus tristique posuere.

back to news >

SUTHERLAND CLIENTS

REQUEST A QUOTE